Last Updated on December 26, 2022 by tawhid

To make white gas, start by mixing together 2 parts water and 1 part lye in a non-reactive container. Then, add 1 part antifreeze to the mixture and stir until it’s completely combined. Next, slowly pour the mixture into a clean, empty gallon jug while being careful not to splash it on yourself.

Once the jug is full, screw on the lid tightly and shake it vigorously for 2 minutes. Finally, store the jug in a cool, dark place for 24 hours before using the white gas as fuel for your lantern or camp stove.

  • 1) Pour one gallon of water into a clean, empty five-gallon bucket
  • 2) Add two and a half cups of lye to the water, and stir until the lye is completely dissolved
  • 3) Carefully pour in six gallons of petroleum distillate, such as kerosene or white gas
  • Stir gently to mix
  • 4) Cover the bucket with a lid or heavy plastic sheeting, and set it in an area where it will not be disturbed for 24 hours
  • 5) After 24 hours, carefully pour off the clear liquid at the top of the mixture into another container, being careful not to disturb the sludge at the bottom of the bucket
  • The clear liquid is your white gas

Diy White Gas Stove

If you’re an avid camper or hiker, you know the benefits of packing a lightweight white gas stove. But did you know that you can easily make your own white gas stove at home with just a few materials? Here’s what you’ll need:

-A tuna can (or other small can) -A drinking straw -A piece of wire

-Scissors or a knife -White gas Start by making two small holes in the bottom of the tuna can.

Then, cut a length of drinking straw that is slightly shorter than the height of the can. Insert one end of the straw into one of the holes in the bottom of the can. Use a piece of wire to create a small loop on the other end of the straw.

This will be used to hold up your fuel bottle. Fill your fuel bottle with white gas and screw on the cap. Suspend it from the wire loop on top of your stove.

Make sure that there are no leaks in either your fuel bottle or your stove before lighting it! To light your stove, simply remove the cap from your fuel bottle and light it with a match or lighter. Hold it close to, but not touching,the hole in the side of your stove.

How to Make White Gas


How is White Gas Made?

White gas, also known as naphtha, is a clear liquid made from petroleum. It’s used in a variety of industries, including as a fuel for camping stoves and lanterns. The process of making white gas begins with crude oil, which is composed of hydrocarbons – molecules consisting of hydrogen and carbon atoms.

This mixture is then distilled to separate the different hydrocarbon molecules based on their boiling points. The lightest molecules are vaporized first and collected at the top of the distillation column while the heaviest molecules remain liquid. The next step is to remove impurities from the lightest hydrocarbon molecules using a process called fractional distillation.

This involves heating the molecules until they turn into vapor and then cooling them so that they condense back into a liquid. The resulting product is white gas. White gas is highly flammable and has a wide range of uses, from powering camp stoves to being used as a solvent in cleaners and paint thinners.

It’s also an ingredient in some types of gasoline.

Is White Gas Same As Gasoline?

No, white gas is not the same as gasoline. White gas, also known as naphtha, is a clear, colorless liquid with a slightly sweet odor. It’s derived from petroleum and is highly flammable.

Gasoline, on the other hand, is a mixture of hydrocarbons that are derived from petroleum. It’s also flammable but less so than white gas. Both white gas and gasoline can be used as fuel for internal combustion engines but they’re not interchangeable.

That’s because the properties of each fuel produce different results when burned. For instance, white gas burns cleaner than gasoline does and produces less carbon dioxide emissions. It also has a higher octane rating which means it can be used in high-performance engines without knocking or ping sounds occurring.

However, one downside to using white gas is that it doesn’t evaporate as quickly as gasoline does which makes it harder to start an engine in cold weather conditions.

Is Naphtha the Same As White Gas?

Naphtha and white gas are not the same. Naphtha is a highly volatile, flammable liquid hydrocarbon mixture that is derived from petroleum. It has a light color and odor and is used as a solvent or thinner in paint thinners and some cleaners.

White gas, on the other hand, is a clear, nearlyodorless fuel that is made from refined petroleum. It is commonly used in camping lanterns and stoves.

Can I Use Gasoline Instead of White Gas?

No, you cannot use gasoline instead of white gas. Gasoline is a different type of fuel that is not compatible with white gas stoves. If you try to use gasoline in a white gas stove, it will not work correctly and could potentially damage the stove.

What is White Gas Good For?

White gas is a type of petroleum product that is used as a fuel for lanterns and camping stoves. It is also known as Coleman fuel or white spirits. White gas is a very versatile fuel that can be used in many different ways.

One of the most popular uses for white gas is as a lantern fuel. Lanterns that use white gas as a fuel source are typically very bright and provide a long-lasting light source. White gas is also commonly used as a camp stove fuel.

Camping stoves that use white gas as a fuel source are typically very reliable and efficient. White gas is also popularly used as a cleaning solvent. It can be used to clean greasy tools and parts, as well as to remove stains from clothing.

Is White Gas the Same As Kerosene?

There is a lot of confusion out there about whether white gas and kerosene are the same thing. The short answer is no, they are not the same. Here’s a more detailed explanation:

White gas is a clear, colorless liquid that is highly flammable. It is made from distilled petroleum and is used as a fuel for lanterns, camp stoves, and other portable heaters. Kerosene, on the other hand, is a dark-colored liquid that is also made from petroleum.

It too is highly flammable and is often used as a fuel for lamps and heaters. However, kerosene burns with a much cleaner flame than white gas does. So while these two liquids may be similar in some ways, they are definitely not the same thing.

If you’re looking for a clean-burning fuel for your lantern or heater, stick with kerosene – it’s the better choice!

Let’s Make White Gas Camp Fuel # 1


To make your own white gas, also known as camp fuel, you’ll need to gather a few supplies. You’ll need kerosene, rubbing alcohol, and either a funnel or a coffee filter. Heat the kerosene in a pan over low heat until it’s warm but not hot to the touch.

Add the rubbing alcohol to the kerosene and stir gently until they’re combined. If you’re using a funnel, pour the mixture into a clean container. If you’re using a coffee filter, let the mixture cool slightly so it doesn’t burn you, then pour it slowly into the filter.

The coffee filter will catch any impurities in the mixture. Let the mixture sit for at least an hour before using it.

Leave a Reply

Your email address will not be published. Required fields are marked *