Last Updated on December 8, 2022 by tawhid
If you have a Ford Explorer with power steering assist fault, there are some things you can do to fix it. First, check the power steering fluid level and add more if needed. If that doesn’t fix the problem, you may need to replace the power steering pump.
- Check the power steering fluid level and add fluid if needed
- Inspect the power steering belt for damage and replace if necessary
- Check the electrical connection to the power steering pump and repair or replace as necessary
- Inspect the power steering pump for damage and replace if necessary
How to Reset Power Steering Assist Fault
If you’re like most drivers, you rely on your power steering to make driving easier. So, when you get a power steering assist fault message, it can be worrisome. But don’t worry!
Resetting the power steering assist fault is relatively easy and only takes a few minutes.
To reset the power steering assist fault, start by turning off the engine. Next, disconnect the battery cables from the negative terminal.
Once the cables are disconnected, touch the positive and negative terminals together for 30 seconds. This will reset the system and clear any codes that may have been tripped.
After you’ve done this, reconnect the battery cables and start the engine.
The power steering assist fault should now be cleared and you can get back to driving without worry!
Credit: vehq.com
How Much Does It Cost to Fix the Power Steering Assist Fault?
When it comes to troubles with your car, there are a lot of things that can go wrong. One issue you might face is power steering assist fault. This can be a big problem because it can make driving your car very difficult.
If you’re wondering how much it might cost to fix this issue, read on for more information.
The first thing you need to know is that there are a few different things that could be causing your power steering assist fault. It could be something as simple as a loose connection or it could be something more serious like a faulty pump.
Because of this, the cost to fix the problem can vary quite a bit.
If the problem is caused by a loose connection, then it should be relatively inexpensive to fix. You may just need to tighten some bolts or replace some hoses.
On the other hand, if the problem is caused by a faulty pump, then it will likely be more expensive to repair. The pump itself will need to be replaced and this can often be quite costly.
In general, you should expect to pay somewhere between $200 and $1000 to fix a power steering assist fault.
The exact amount will depend on the severity of the problem and what needs to be done in order to fix it. If you’re worried about the cost, talk to your mechanic about financing options or look into aftermarket warranty programs that can help cover the repairs.
What Does Power Steering Assist Fault Mean on a Ford Explorer?
If you’re driving a Ford Explorer and the power steering assist fault light comes on, it means there’s a problem with the vehicle’s electric power steering system. The system relies on sensors to detect when the driver is turning the wheel and sends an electric current to help assist in turning. If there’s a problem with any of the sensors or other components in the system, it can cause the power steering assist fault light to come on.
If you see this light, it’s important to take your vehicle to a qualified repair shop as soon as possible so they can diagnose and fix the problem. In some cases, it may be something as simple as a loose connection that needs to be tightened. But if there’s more serious damage, such as a faulty sensor, it will need to be replaced.
Ignoring the problem could lead to further damage down the road and make your Explorer harder to steer, so don’t delay in getting it fixed.
Why Does My Car Say Power Steering Assist Fault?
If your car is displaying a power steering assist fault message, it means that there is an issue with the system that provides power assistance to the steering. This could be due to a problem with the power steering pump, belt or hose, or it could be an issue with the electronic control unit. If you’re experiencing this problem, take your car to a qualified mechanic so they can diagnose and fix the issue.
Can You Drive With Power Steering Assist Fault?
If your power steering assist fault light comes on, it means that there is a problem with your power steering system. This could be caused by a number of things, such as a low fluid level, a leak in the system, or a problem with the power steering pump. If this light comes on, you should take your car to a mechanic to have it checked out.
In the meantime, you can still drive your car, but you may find it harder to turn the wheel.
Ford Explorer 2013 Steering Assist Fault Home service Power Steering Specialist 09362558278 TM
Conclusion
If you have a Ford Explorer with power steering assist fault, there are some things you can do to fix it. First, check the power steering fluid level and add fluid if needed. Next, check the power steering pump for leaks and replace it if necessary.
Finally, check the power steering system for air leaks and repair them as needed.