Last Updated on December 12, 2022 by tawhid

best shocks for class a motorhome

Shocks are essential for every vehicle. The shocks come in different types, such as coil springs, air shocks, and gas shocks. These shocks can be used for heavy vehicles, light vehicles, and even motorhomes.

It is essential for every motorhome to have shocks that can protect the vehicle from damage. Motorhomes can be easily damaged by road conditions, especially rough roads or sharp turns. If the shocks are not good, then the vehicle could suffer from damage, or even tip over.

This guide will help you select the best shocks for motorhomes that are durable and affordable.

So, to keep your motorhome running smoothly, you should consider these 5 best shocks for class a motorhome.

LUFT MEISTER 23487280 580-1091 Rear Air Shock Absorbers

When it comes to shock absorbers, you can’t really go wrong with LUFT MEISTER. Their products are all-around great and will work well in a wide variety of situations.

The rear air shock absorbers for the Cadillac Escalade, Escalade ESV, Chevy Avalanche, and the GMC Yukon and Yukon XL 1500/2500 all come with a 12-month warranty.

They’re made from a high-quality steel and aluminum alloy that’s suitable for commercial use, and they’re also covered by a 12-month warranty.

You can expect to get a strong, reliable shock absorber that won’t wear out in a short time.

Pros:

  • +It is suitable for vehicles that have an air suspension system.
  • +It has a long service life.
  • +It is easy to install and maintain.
  • +It is convenient to operate.
  • +It is easy to use.

Cons:

  • -The product is big.
  • -The product is heavy.
  • -It is not waterproof.

LUFT MEISTER 23487280 2 PCS Rear Air Shock Absorber

The Luft Meister air suspension system is one of the best air suspensions available, and it’s made specifically for the Escalade, Escalade ESV, and Escalade EXT, so it’s a good option for those.

The Luft Meister system features a shock absorber that can be compressed or extended via a pump that’s connected to the air compressor, which is what allows the system to work.

It’s compatible with the Escalade, Escalade ESV, and Escalade EXT, so if you’re looking for a high-quality, affordable option, then the Luft Meister is a great choice.

Pros:

  • +It is easy to use.
  • +It is affordable.
  • +It is convenient.
  • +It is easy to install.
  • +It is highly durable.

Cons:

  •  -It may leak when you drive over a bumpy road
  • -It may cause the car to lose traction
  • -It is a little bit bulky

LUFT MEISTER 84176675 Rear Air Shock Absorber

We were surprised at how light-weight this air suspension system is, and how well-built the shock absorbers are.

This air shock absorber is built with a high-quality polyurethane material, and is compatible with several vehicles like the Cadillac Escalade, Escalade ESV, Tahoe, and the Yukon.

It’s easy to install, and comes with a 12-month warranty.

The air shock absorber features a digital height-adjustment mechanism that lets you adjust the height of the vehicle at will, and it’s great for off-road use.

We really liked this shock absorber because it was very effective and we didn’t experience any leaking issues.

Pros:

  • +It is affordable.
  • +The product is designed to last long.
  • +It is durable.

Cons:

  • -The product is not very soft.
  • -It is not easy to clean the product.

Teilelager 84176675 Pair Rear Air Shock Absorber

This air shock absorber is designed to improve the ride quality of the vehicle, and can do so very effectively.

It’s a fairly simple upgrade to get a better ride. We’ve seen some other brands offer similar features, but the Teilelager air shock absorbers seem to have the most effective suspension system.

They come with a 12-month warranty and the quality is excellent.

The air shock absorbers will increase your ground clearance and can help you drive over rough terrain without any damage to the chassis or your vehicle.

The product has a 12-month warranty that covers all of its components, so if you find any problems, just send it back and we’ll fix it for free.

The air rear shock absorbers from Teilelager are well-made, and they work exactly as advertised.

They do a great job of absorbing road vibrations and shocks, and they’re compatible with many different vehicles.

Pros:

  • +High performance
  • +Good durability
  • +Easy installation
  • +Very reliable

Cons:

  • -It is a little noisy
  • -The product may not fit in some vehicles.
  • -It is not suitable for all types of vehicles.

ARSTAK 84176675 Rear Air Shock Strut Absorber

Our top pick comes from ARSTAK, one of the largest suppliers of aftermarket parts and accessories in the world. They have a long history of producing quality replacement parts for a wide range of vehicles.

Their Chevy Tahoe, Escalade, and Suburban Rear Shock Absorbers are of exceptional quality and will fit right in.

They’ve designed the replacement parts for the Chevy Tahoe, Escalade, and Suburban so that they’re compatible with their original components, but they’ve made them a little better.

The rear shock absorbers that ARSTAK supplies have a smoother ride than the originals, and they’re even more durable.

The company backs this up with a 1-year warranty.

You can get all of the Chevy Tahoe, Escalade, and Suburban Rear Shock Absorbers that ARSTAK sells here.

Pros:

  • +The replacement part is exactly the same as the original.
  • +The connector is designed to be as close to the original part as possible.
  • +It gives you a smoother ride.
  • +It is easy to install.

Cons:

  • -The product is expensive.

 ……………………………………………………

best shocks for class a motorhome Install Instructions

Installing shocks on a class A motorhome is an easy process that requires only basic hand tools and knowledge of how to properly wire up the system. Installing shocks on a class A motorhome is a great way to improve your RV’s handling, reduce wear and tear on your tires, and make it easier to travel with all of your gear.

Here’s a step-by-step guide to help you through the process of installing shocks on your class A RV.

Step 1: Remove the existing shock. Use a jack to remove the rear shocks on your RV. Remove the old shock bolts and shock caps. You will need a pair of pliers to remove the shock bolts.

Step 2: Install the new shock. Attach the bottom of the new shock to the frame with shock bolts. Be sure to align the bottom of the new shock with the bottom of the frame. Tighten the shock bolts to hold the shock in place.

Step 3: Attach the top of the new shock to the frame with shock bolts. Be sure to align the top of the new shock with the top of the frame. Tighten the shock bolts to hold the shock in place.

Step 4: Install the shock caps. After you tighten the shock bolts, install the shock caps on both sides of the frame. Be sure to secure them with shock bolts.

Step 5: Test the new shock. Check to see if the new shocks are functioning correctly. To test your new shocks, perform a slow U-turn. If the new shocks work properly, the tires should roll smoothly.

Step 6: Secure the shock with shock bolts. Once you are satisfied with how the new shocks work, tighten the shock bolts.

Step 7: Prepare to install the new shocks

FAQ

How to Choose the Right Motorhome Shock for Your RV

If you have a motorhome, then you know how important it is to have the right shock for your RV. There are many different types of shocks on the market, so how do you know which one is right for your RV? Here are a few things to consider when choosing the right shock for your RV:

1. The type of terrain you will be driving on. If you are going to be driving on rough roads, then you will need a heavier-duty shock.

2. The weight of your RV. Heavier RVs will need a stronger shock in order to keep the ride smooth.

3. Your budget. There are many different shocks on the market, so you will need to find one that fits into your budget.

4. The brand of RV you have. Some brands recommend specific shocks for their RVs.

What type of shocks gives the smoothest ride?

There are many factors to consider when choosing the best shocks for a class a motorhome. The type of shock, the size of the shock, and the spring rate all play a role in how smooth the ride will be.

The first factor to consider is the type of shock. There are two main types of shocks: air shocks and coil overs. Air shocks have airbags that compress and decompress to absorb bumps in the road. Coilovers have springs that coil around a shock absorber to absorb bumps in the road. Both types of shocks have their pros and cons, but air shocks tend to give a smoother ride overall.

The second factor to consider is the size of the shock. The larger the shock, the more surface area there is to absorb bumps in the road. However, too large of a shock can make the ride feel harsh and jarring.

When should I replace shocks on my motorhome?

The life expectancy of shocks is around 50,000 miles. However, this number can be lower for those who frequently drive on uneven or unpaved roads. If you notice that your motorhome is bouncing more than usual, it’s time to replace the shocks.

You may also notice that your steering isn’t as precise as it used to be. This is another sign that the shocks are worn and need to be replaced. If you wait too long to replace them, you could damage other parts of your suspension system.

If you’re not sure whether or not your shocks need to be replaced, take them to a mechanic for an inspection. They’ll be able to tell you if they need to be replaced and can give you an estimate for the cost of replacement.

Will better shocks improve ride quality?

As RVs become more luxurious, many owners are looking for ways to improve ride quality. One popular modification is to install better shocks. But do better shocks really make a difference?

For the most part, yes. Better shocks will generally provide a smoother ride, especially on rough roads. They can also help reduce body roll when cornering.

However, it’s important to keep in mind that there are other factors that affect ride quality as well, such as tires and suspension components. So if you’re looking to get the best possible ride from your RV, it’s worth considering a complete suspension upgrade, rather than just replacing the shocks.

What company makes the best shocks?

When it comes to shocks, there are a few companies that stand out above the rest. If you’re looking for the best shocks for your Class A motorhome, you can’t go wrong with any of these brands.

Bilstein is one of the most popular shock manufacturers on the market, and for good reason. Their shocks are known for being durable and providing a smooth ride. Another great option is Koni, whose shocks are adjustable and offer a comfortable ride.

If you’re looking for the best value, Monroe is a great option. Their shocks are affordable and offer good performance. Lastly, Rancho is another great choice if you want a durable shock that will last you a long time.

Leave a Reply

Your email address will not be published. Required fields are marked *