The acronym “OPT” stands for “optional heating.” This refers to a feature on some campers that allows the camper to be heated using an optional source of heat, such as a propane heater. This is in contrast to campers that only have electric heating, which may not be an option if the campsite does not have access to electrical hookups.
While OPT heat may cost more to operate than electric heat, it can be a lifesaver in cold weather camping situations.
If you’ve ever been camping, you know that there are a lot of different things that can affect your comfort level. One of those things is the temperature inside your camper. If it’s too hot, you’ll be miserable, but if it’s too cold, you might not be able to sleep.
That’s why it’s important to know what “opt heat” means in a camper.
Simply put, “opt heat” is the ideal temperature for a camper. It’s not too hot and not too cold – just perfect for sleeping or relaxing.
Of course, every person is different and what might be comfortable for one person may not be comfortable for another. But in general, the opt heat range for a camper is between 65 and 75 degrees Fahrenheit.
So how do you achieve opt heat in your camper?
The best way is to invest in a good quality heater or air conditioner. That way, you can adjust the temperature to whatever setting makes you most comfortable. Just remember to keep an eye on the thermostat so that you don’t accidentally make your camper too hot or too cold!
Dometic Heat Strip
Dometic Heat Strip
If you are looking for a way to add some extra warmth to your RV, then you may want to consider installing a Dometic heat strip. This simple and easy-to-install accessory can make a big difference on chilly nights, and it’s relatively inexpensive too.
Here’s what you need to know about Dometic heat strips.
What is a Dometic heat strip?
A Dometic heat strip is an electrical heating element that can be mounted inside your RV.
Most models are designed to be installed near the ceiling, and they come with all the necessary hardware for installation. Once installed, the heat strip will provide additional warmth whenever it is turned on.
3101121.030 Heater
When it comes to finding the perfect heater for your home, there are a few things you need to keep in mind. The first is the size of the room or area you need to heat. Heaters come in all different sizes, and you want to make sure you get one that’s powerful enough to do the job, but not so powerful that it wastes energy.
The second thing is what type of fuel you want to use. The most common types are electric, natural gas, and propane. Electric heaters are usually the most expensive to operate, but they’re also the easiest to install.
Natural gas and propane heaters both have their pros and cons, so it’s important to do your research before making a decision.
Finally, you need to think about how long you plan on using the heater. If it’s just for occasional use, then something cheaper might be fine.
But if you plan on running it day and night during winter, then you probably want something a bit more heavy-duty (and expensive).
Dometic Optional Heat Kit
If you’re looking for a way to keep your RV warm during those cold winter months, you may want to consider investing in a Dometic Optional Heat Kit. This kit includes everything you need to install a heater in your RV, and it’s relatively easy to set up. Here’s what you need to know about the Dometic Optional Heat Kit.
The Dometic Optional Heat Kit comes with two main components – a heat exchanger and an installation kit. The heat exchanger is designed to be installed in your RV’s fresh water tank, and it will use the hot water from your tank to heat the air inside your RV. The installation kit includes all of the necessary hoses and fittings needed to connect the heat exchanger to your RV’s plumbing and electrical systems.
Installing the Dometic Optional Heat Kit is fairly straightforward, but it is important that you follow the instructions carefully. If you’re not comfortable doing the installation yourself, there are plenty of qualified technicians who can do it for you. Once installed, the heater will operate automatically when needed, so there’s no need to worry about turning it on or off manually.
If you live in an area with cold winters, or if you like to camp in cooler weather, a Dometic Optional Heat Kit can be a great addition to your RV. It’s easy to install and operate, and it can help keep you warm all winter long!
Dometic Heat Strip Not Working
If your Dometic heat strip isn’t working, there are a few things you can check to troubleshoot the issue. First, make sure that the circuit breaker is turned on. Next, check to see if the power cord is plugged in properly.
Finally, inspect the heat strip itself for any damage or debris that may be blocking the flow of electricity. If you’re still having trouble, reach out to a qualified technician for assistance.
Dometic Brisk Air 2 Ducted Heat Strip Installation
If you have a Dometic Brisk Air 2 RV air conditioner, you may want to consider installing a ducted heat strip. This will allow you to use your AC unit to heat your RV as well as cool it. Here is a step by step guide to help you install your Dometic Brisk Air 2 ducted heat strip.
1. First, you need to remove the screws that hold the front cover of the AC unit in place. There are typically four screws located at the corners of the cover. Once the screws are removed, the cover can be lifted off of the unit.
2. Next, locate the heating element inside the AC unit. It will be attached to two wires coming from the control board at the back of the unit. Carefully disconnect these wires from their terminals on the control board (it is helpful to take a photo beforehand so you know how they should be reconnected later).
3. Now, remove any insulation that may be surrounding the heating element (this will vary depending on your RV model). Once this is done, you can unscrew and remove the heating element from its housing in the AC unit.
4a.
If your RV has pre-existing ductwork: great! You can skip ahead to step 6. If not, continue on with step 4b below.
4b. If your RV does NOT have pre-existing ductwork: Measure and cut pieces of flexible aluminum ducting to size (you’ll need one main trunk line and several smaller branch lines). Assemble all pieces using sheet metal screws and seal all seams with foil tape designed for HVAC applications – DO NOT use regular duct tape as it will not stand up to high temperatures!
Make sure each section of ducting is supported every few feet so it doesn’t sag over time and restrict airflow.”
5a*. If your RV has pre-existing return vents: great! You can skip ahead to step 7** . If not, continue on with step 5b below*.
5b*. If your RV does NOT have pre-existing return vents: Measure and cut pieces of flexible aluminumductingto size (you’ll need one main trunk lineand several smaller branchlines).
Credit: www.reddit.com
What is Opt Heat on Camper?
If you’ve ever been camping in a pop-up camper, you know that they can get quite warm inside when the sun is beating down on them. One way to help keep your camper cool is to use the opt heat feature. This feature allows you to reflect sunlight away from the camper using special mirrors.
By reflecting the sunlight away, you can help keep your camper cooler and more comfortable.
How Do I Turn the Heat on in My Camper?
Assuming you have a gas heater:
First, locate the thermostat inside your RV. It will likely be on an interior wall near the floor.
Once you’ve found it, turn the knob to the left to increase the temperature. You may need to experiment a bit to find the perfect setting for your camper, but generally speaking, most people find that somewhere between 60 and 70 degrees is comfortable. If you’re not sure what temperature to set it at, start with 60 and adjust as needed.
Does the Dometic Air Conditioner Have Heat?
Yes, the Dometic air conditioner has heat. The unit blows warm air into the room to create a comfortable environment. This is ideal for those who want to take the chill out of the air without making it too hot.
How Do You Use Heat in a Travel Trailer?
If you’re like most people, you probably don’t think much about how you use heat in your travel trailer. After all, it’s just a matter of turning on the furnace and adjusting the thermostat, right? Wrong.
There’s a bit more to using heat in a travel trailer than meets the eye. Here are some tips to make sure you’re using heat in your travel trailer correctly:
1. Use a Furnace Thermostat
First and foremost, always use a furnace thermostat when operating your travel trailer’s furnace. This will help ensure that your furnace doesn’t overheat and damage your RV. Additionally, it will help keep your energy bills down by only heating your RV when necessary.
2. Know When to Use the Furnace vs. Space Heaters
Generally speaking, you should only use the furnace when it’s absolutely necessary – such as overnight or during cold weather conditions. During milder temperatures, space heaters can be used to save on energy costs.
Just be sure to turn off any space heaters when you leave the RV so they don’t pose a fire hazard.
3. Don’t Block Vents
Be sure not to block any vents when using space heaters or running the furnace.
Blocked vents can cause dangerous build-ups of carbon monoxide gas inside your RV. To avoid this, simply crack open a window slightly when using space heaters and keep all vents clear when running the furnace.
How To Turn The Heat on In Your RV or Camper
Conclusion
The term “opt heat” refers to the practice of using an RV’s heater to cook food. This can be done by running the engine and turning on the heater, or by using a portable propane heater. Opt heat is a popular cooking method among campers because it is efficient and allows food to be cooked quickly.