To smoke your taillights, you will need red spray paint and a clear sealant. First, clean the surface of your taillights with soap and water. Next, tape off any areas that you don’t want painted.
Then, spray the red paint onto the taillights in thin coats. Allow the paint to dry completely between each coat. Finally, apply a clear sealant to protect the paint job.
- Purchase a set of smoked tail lights for your vehicle
- Open up the back of your car and remove the screws holding in your current tail lights
- Take out your old tail lights and insert the new smoked ones in their place
- Put the screws back in to secure the new lights in place
How to Smoke Tail Lights With Spray Paint
Smoke your taillights with spray paint for a quick and easy way to customize your car or truck. This method is temporary, so you can experiment with different colors and styles before committing to a more permanent solution. Plus, it’s an inexpensive way to add some personality to your ride.
Here’s how to do it:
1. Choose the color of spray paint you want to use. Test out a few colors on scrap paper or cardboard first, so you can decide which one you like best.
2. Tape off the area around the taillights with painters tape, being careful not to get any paint on the glass or plastic lens. You may also want to remove the bulbs from the sockets before painting, just in case any paint gets inside (although this isn’t strictly necessary).
3. Apply several light coats of spray paint to the area, allowing each coat to dry completely before adding another.
When you’re finished, remove the tape and re-install the bulbs (if you removed them).
4. Stand back and admire your handiwork! The smoke effect should be temporary, lasting anywhere from a few days to a week or two depending on the type of paint you used.
If you want it to last longer, consider clear coating over top of the colored paint once it’s dry.
How to Smoke Tail Lights With Film
If you’re looking to add a unique and stylish touch to your car, why not smoke your tail lights with film? It’s a fairly simple process that anyone can do at home, and it only takes a few minutes. Here’s what you need to know about how to smoke tail lights with film.
First, you’ll need to purchase some headlight or taillight film. You can find this at most auto parts stores, or online. Once you have the film, clean the area around the tail light with soap and water.
Then, use a razor blade or utility knife to carefully cut out a piece of the film that will fit over the light.
Next, peel off the backing of the film and apply it to the taillight. Use your fingers or a credit card to smooth out any bubbles that may form.
Finally, use a heat gun or hair dryer on low heat to slowly shrink the film down so that it’s tight against the light.
And that’s it! Now you have smoked taillights that will give your car a unique look.
Be sure to clean the lights regularly though, as dirt and debris can build up under the film and cause problems later on.
Smoke Tail Lights Legal
Smoke tail lights are often seen as a stylish accessory for vehicles. But are they legal? The answer may surprise you.
In most states, it is perfectly legal to have smoke tail lights. However, there are a few states that have restrictions on them. California, for example, prohibits any type of tinted light coverings on vehicles.
So if you live in California and want to add smoke tail lights to your car, you’ll need to remove them when driving in the state.
There are also a few other states with similar restrictions, so be sure to check the laws in your state before installing smoke tail lights. But in general, they are legal and can add a touch of style to your ride.
Smoke Tail Lights near Me
If you’re looking for a great place to find smoke tail lights near you, look no further than your local car show! Car shows are the perfect place to find all kinds of aftermarket parts and accessories for your vehicle, and that includes smoke tail lights. These lights add a unique look to your car or truck and can really make it stand out from the crowd.
Plus, they’re relatively inexpensive and easy to install, so there’s no reason not to add them to your ride.
Smoke Tail Lights Vinyl
Smoke tail lights are a great way to customize your car or truck and make it look more aggressive. But what are they, exactly? Smoke tail lights are simply taillights that have been tinted with a dark film, giving them a smoked appearance.
This look is popular with many car and truck enthusiasts because it gives off a cool, stealthy vibe.
But why stop at just the taillights? You can also get smoked headlight covers, which will give your whole ride a menacing look.
Or go all out and get smoked headlights, taillights AND fog lights! Now THAT will turn heads when you’re cruising down the street.
If you’re looking to add some smoke tail lights to your ride, be sure to check out our selection at XtremeAutoAccessories.com.
We’ve got a wide variety of styles and brands to choose from, so you’re sure to find the perfect set for your car or truck.
Credit: www.cruxmoto.com
How Do I Blacken My Tail Lights?
Blackening your tail lights is a simple and effective way to customize your car. There are many ways to achieve this look, but we will focus on the two most popular methods: painting and tinting.
Painting is the most common method of blackening tail lights.
You can use any type of paint, but we recommend using a high-quality automotive paint for best results. Simply remove the lens covers from your taillights and clean them thoroughly with soap and water. Next, apply several thin coats of paint, allowing each coat to dry completely before applying the next.
Once you’re satisfied with the coverage, allow the final coat to dry completely and then replace the lens covers.
Tinting is another popular option for blackening tail lights. Tint film is available in a variety of colors and shades, so you can choose the exact look you want for your car.
Applying tint film is similar to painting; simply clean the taillight lenses thoroughly and then apply the tint film according to manufacturer’s instructions. Again, be sure to allow each layer to dry completely before moving on to the next one. Once the tint film is applied, replace the lens covers and enjoy your new look!
How Much Does It Cost to Smoke Out Tail Lights?
Smoked taillights are a popular styling mod among car enthusiasts. They give your car a unique look that can set it apart from the rest on the road. But how much does it cost to smoke out your taillights?
The cost of smoking out your taillights will vary depending on a few factors, such as the type of film you use and whether you do it yourself or have it done professionally. Generally speaking, you can expect to pay anywhere from $20 to $100 to smoke out your taillights.
If you choose to do it yourself, you’ll need to purchase some smoked film for your taillights.
This can be found at most auto parts stores or online retailers. The cost of the film will vary depending on the size and quality, but you can expect to pay around $20 for a decent quality sheet.
Installing the smoked film is relatively easy and can be done in an afternoon.
However, if you’re not confident in your ability to do it yourself, there are many professional shops that offer this service. The cost of having someone else do it for you will obviously be more than doing it yourself, but it will ensure a perfect install with no risk of damaging your lights. Expect to pay around $50-$100 for this service.
What’S the Best Way to Tint Tail Lights?
One of the best ways to tint your tail lights is with a film cover. This type of product comes in a variety of colors, allowing you to choose the perfect shade for your car. Applying a film cover is relatively simple and can be done at home with little difficulty.
Another option for tinting your tail lights is with paint, though this method is not as foolproof as using a film.
Are Smoked Tail Lights Dot Approved?
No, smoked tail lights are not DOT approved. While some states allow them, most do not and they can result in a ticket if you are pulled over. Smoked tail lights can make it difficult for other drivers to see your brake lights, which can create a safety hazard.
If you want to change the look of your vehicle, consider using tinted overlays or covers instead of painting or tinting the lights themselves.
HOW TO SMOKE A TAIL LIGHT!
Conclusion
If you’re looking to add a unique touch to your car, smoking your tail lights is a great way to do it. Smoking your tail lights is a fairly simple process that can be done at home with just a few materials.
First, you’ll need some black vinyl wrap.
You can find this at most auto stores or online. Next, you’ll need to clean the area around your tail light with alcohol to make sure the vinyl will adhere properly. Once the area is clean, simply apply the vinyl wrap and use a heat gun or hair dryer to heat it up and conform it to the shape of your taillight.
Smoked taillights are a popular mod among car enthusiasts and can really set your car apart from the rest. With just a little time and effort, you can easily smoke your own taillights at home.